Magnitude 40W 24VDC LED Dimmable Driver

: $67.00
Transformer Input leads are 20 AWG. Output leads are 14 AWG. Lead insulation is 105 °C. The transformer uses a class B 130 °C insulation system. Enclosure Enclosure temperature will not exceed 70 °C @ 40 °C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated. 

Magnitude’s AR-Series (auto-reset) of dimmable magnetic DC drivers are built especially for LED systems. They provide the following benefits: 
  • Auto-Reset Circuit Breakers – The AR-series offers breakers on both the input and the output. 
  • Compatibility – There are no minimum load requirements when used with a dimmer. The drivers cause no flicker or any of the other side effects that can result from a lack of synchronization between voltage mode drivers and PWM low voltage drivers in the light fitting. 
  • Perfect Dimming – Fully compatible with low voltage dimmers, in contrast to voltage mode drivers that balance the voltage in the system and prevent the dimmer from working. 
  • Lower Power Consumption – Bring about an improvement in efficiency of 15%, due to the avoidance of unnecessary double conversion in the circuitry. 
  • No RFI Issues – Operate at a perfect 60Hz sinus wave, therefore they produce no radio frequency interference whatsoever.
  • Depth: 2 in.
  • Frequency: 60Hz
  • Industry Standards: ETL, CSA, UL 5085-1
  • Input Voltage: 120
  • Length: 5.03 in.
  • Output Voltage: 24VDC
  • Watts: 40
  • Width: 2.14 in.
Click to download a spec sheet.
Click to download installation instructions.
Click to download a list of compatible dimmers.
Shopping Cart
Your cart is empty.

Need Help?
Give Us A Call.

Store Hours:
Monday - Friday
9am to 5pm (CST)