Diode LED 40W 24VDC LED Dimmable Driver

Diode LED 40W 24VDC LED Dimmable Driver

$70.35

SKU: OEM-DI-MLV-24V40W Category:

Product Description

Transformer Input leads are 20 AWG. Output leads are 14 AWG. Lead insulation is 105 °C. The transformer uses a class B 130 °C insulation system. Enclosure temperature will not exceed 70 °C @ 40 °C ambient. The wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The wiring compartment’s removable cover is secured by a screw. The enclosure is black powder-coated.

Diode LED’s dimmable magnetic DC drivers are built especially for LED systems. They provide the following benefits:
  • Auto-Reset Circuit Breakers offers breakers on both the input and the output.
  • Compatibility There are no minimum load requirements when used with a dimmer. The drivers cause no flicker or any of the other side effects that can result from a lack of synchronization between voltage mode drivers and PWM low voltage drivers in the light fitting.
  • Perfect Dimming Fully compatible with low voltage dimmers, in contrast to voltage mode drivers that balance the voltage in the system and prevent the dimmer from working.
  • Lower Power Consumption Bring about an improvement in the efficiency of 15%, due to the avoidance of unnecessary double conversion in the circuitry.
  • No RFI Issues Operate at a perfect 60Hz sinus wave, therefore they produce no radio frequency interference whatsoever.

SPECS 

  • Depth: 2 in.
  • Frequency: 60Hz
  • Industry Standards: ETL, CSA, UL 5085-1
  • Input Voltage: 120
  • Length: 5.03 in.
  • Output Voltage: 24VDC
  • Watts: 40
  • Width: 2.14 in.

Click to download a spec sheet.

Click to download installation instructions.

Click to download a list of compatible dimmers.

Weight 2 lbs

We've Made Changes!

You have probably noticed that we’ve made some big improvements to our website.  If you notice anything that is not working correctly, please use our contact form and let us know.

If you are past customer, you will need to use the “Forgot Password” button to refresh your password on the new site.  Sorry for any inconvenience.